Tabscan T2 Scanner For Android Phone With Free EOBD Software and Oild Light Reset Function. Android Phone Tabscan T2 Bluetooth Full System Scan Tool with One Free Car Brand Software like Launch EasyDiag GOLO 3.0 . Tabscan T2 Smart Diagnostic Box Supports ISO & SAE Protocol : ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000, SAE J1850 VPW, SAE J1850 PWM

Tabscan T2 Scanner For Android Phone Tabscan T2 Bluetooth Full System Scan Tool with One Free Car Brand Software Replacement Launch EasyDiag GOLO 3.0
Tabscan T2 Bluetooth Full System Scan Tool for Android Phone Portable Smart Diagnostic Box with One Free Car Brand Software

Tabscan T2 Portable Smart Diagnostic Box Support Diagnose Report Update Online LifeTime For Free

Tabscan T2 Portable Smart Diagnostic Box some function as Launch EasyDiag GOLO 3.0, come with one free car brand software and you can buy two additional car brand software. One device can support at most three car brand. Each car brand cost only 14.99USD!! You can also get free EOBD Diagnose and oil light reset function.

Tabscan T2 Highlight:

    1. With 1 free car brand software: 1 car brand software for free including: VW,AUDI,BENZ,LANDROVER,JAGUAR,VOLVO,PORSCHE,BMW,MINI COOPER,ROLLS-ROYCE), additional car brand only cost 14.99USD/Brand. 3 car brands can be added to 1 device at most.
    2. With free EOBD Software
    3. With free Oil Light Reset Function
    4. Supports ISO & SAE Protocol including: ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000, SAE J1850 VPW, SAE J1850 PWM
    5. Life time free update online

Tabscan T2 Android BT full system scanner Features:
 
1.  Support diagnose report
 Diagnose report will be generated automatically after you run the car scanning, report is easy to found from the app homepage. Results are friendly for users to understand, obvious to see car status.

2. Support ISO &SAE protocol DTC reading and clearing
 Friendly for users to your car is, you can click scan on app, it will recognize your car protocol automatically, generally it can recognize most of the ISO protocol vehicles(ISO 15765-4 CAN, ISO 9141-2, ISO 14230-4 KWP2000, SAE J1850 VPW, SAE J1850 PWM), then it will enter the select module engine and transmission for you to choose.

3. OBD diagnostic service

    Service 0x01-request current powertrain diagnostic data
    Service 0x02-request powertrain freeze frame data
    Service 0x03-request emission related diagnostic trouble code
    Service 0x04-clear/reset diagnostic information related to emissions
    Service 0x05-request oxygen sensor monitor test results(achieved in service 0x06)
    Service 0x06-request on-board monitoring test results for a specific monitored system
    Service 0x07-a diagnostic trouble code related to emissions is detected in the requested driving cycle
    Service 0x08-request for vehicle control system, test or components(currently not support)
    Service $09-request for vehicle information
    Service 0x0A-request a permanent diagnostic trouble code associated with emissions

4. Support vehicle full system diagnostic
 
Oil reset service is available for vehicle, supports the following car brands: Acura, Audi, Bentley, Benz, BMW, Bugatti, Chrysler/Jeep/Dodge, Citroen, Dacia, DS, DFNissan, Daewoo,  Ferrari,  Fiat,  Ford, Buick, Cadillac, Chevrolet, GMC, Honda, Holden, Hyundai, Hummer, Infiniti, Isuzu, Jaguar, Kia, Lamborghini, Lancia, Landrover, Lexus, Lincoln,Maserati, Mazda, Mini, Mitsubishi, Nissan, Oldsmobile, Opel, Pontiac, Peugeot, Porsche, Proton, Renault, Rolls-Royce, Romeo, Rover, Saab, Saturn, Scion, Seat, Skoda, Smart, Sprinter,  Subaru, Suzuki, Toyota, Vauxhall, Volvo, Volkswagen, Baic, Borgward, Brilliance, BYD, Changan, Changan Suzuki, Chery series, Hanteng, IVECO, JMC, Luxgen, Riich,Rely, Karry series, Chery NE, Southeast, Changhe, Cowin auto, DFFS, Emgrand, Faw, Geely, Greatwall, Liebao, Haima, JAC, Jiulong, Maxus, MG, QOROS, Roewe, GQTRUMPCHI,Yema auto, Faw Daihatsu, Zotye, Zz Nissan
 

Support the following car brands diagnostic: Audi, Volkswagen, Mercedes Benz, Land Rover, Jaguar, Volvo, Porsche, BMW, MINI, Rolls-Royce, More car models is coming in the future...

Inside the diagnostic menu there are 7 functions for customer to choose:
 

 1.DTC&FFD (Mode 03/07/0A & Mode 02)
Reading DTCs and clear DTCs, freeze data stream frame.
If any DTCs exist will be shown on the report, also our app will write the DTCs description in specific so that user can understand what is the problem. Besides reading DTCs, there is a button for user to clear the DTCs, user can click the clear button to clear DTCs easily.

2.I/M readiness
Inside I/M readiness, there are two options for user to choose, since DTCs cleared and from this driving cycle, we can choose the options accordingly. Inside the category, user can check the following status.
1.Malfunction indicator lamp(MIL) status.
2.Misfire monitoring.
3.Fuel system monitoring.
4.Comprehensive component monitoring.
5.Catalyst monitoring.
6.Heated catalyst monitoring.
7.Evaporative system monitoring.
8.Secondary air system monitoring.
9.Oxygen sensor monitoring.
10.Oxygen sensor heater monitoring.
11.EGR system monitoring.

3.Live data (Mode 01)
User can check the OBD live data stream from mode 01, it will show the data name, value, unit and range such as:
1).Numbers of DTCs stored in this ECU.
2).Fuel system A status.
3).Fuel system B status.
4).Calculated load value.
5).Engine coolant temperature.
6).Short term fuel trim bank 1.
7).Long term fuel trim bank 1.
8).Intake manifold absolute pressure.
9).Engine RPM.
10).Vehicle speed sensor.
11).Ignition timing advance for #1 cylinder.
12).Intake air temperature.
13).Absolute throttle position.
14).Location of oxygen sensors.
15).Oxygen sensor output voltage bank 1-sensor 1.
16).Short term fuel trim bank 1 - sensor 1.
17).Oxygen sensor output voltage bank 1-sensor 2.
18).Short term fuel trim bank 1 - sensor 2.
19).OBD requirements to which vehicle is designed.
20).Time since engine start.
21).Distance travelled while MIL is activated.
22).Commanded evaporative purge.
23).Number of warm-ups since diagnostic trouble codes cleared.
24).Distance traveled since DTCS cleared.
25).Barometric pressure.
26).Catalyst temperature bank 1, sensor 1.
27).Control module voltage.
28).Absolute load value.
29).Fuel/Air commanded equivalence ratio.
30).Relative throttle position.
31).Ambient air temperature.
32).Absolute throttle position B.
33).Accelerator pedal position D.
34).Accelerator pedal position E.
35).Commanded throttle actuator control.
36).Type of fuel currently being utilized by the vehicle.
37).Long term secondary O2 sensor fuel trim - bank 1(use if only 1 fuel trim value).
Etc.

User can select data name, topping the data you need, check curve chart, freeze the current data stream, and clear DTC.

4.On board monitor(Mode 06)
In this mode car device will recognize car brand manufacturer automatically, after user choose car model, on board monitor status will be shown on the screen.
     1.Exhaust gas sensor monitor bank 1-sensor 1.
     2.Exhaust gas sensor monitor bank 1-sensor 2.
    3.Catalyst monitor bank 1.
    4.VVT monitor bank 1.
    5.Purge flow monitor.
    6.Exhaust gas sensor heater monitor bank 1-sensor 1.
    7.Exhaust gas sensor heater monitor bank 1-sensor 2.
    8.Misfire cylinder 1 data.
    9.EWMA misfire counts for previous driving cycles.
    10.Misfire counts for last current driving cycles.
    11.Misfire cylinder 2 data.
    12.EWMA misfire counts for previous driving cycles.
    13.Misfire counts for last/current driving cycles.
    14.Misfire cylinder 3 data.
    15.EWMA misfire counts for previous driving cycles.
    16.Misfire counts for last/current driving cycles.
    17.Misfire cylinder 4 data.
    18.EWMA misfire counts for previous driving cycles.
    19.Misfire counts for last/current driving cycles.

5.Component test(Mode 08)
Test each component from vehicle, including action test for components.

6.Vehicle information(Mode 09)
1.Vehicle general information, including VIN, calibration ID, calibration verification numbers, ECU name
2.Vehicle enhance information
lOBD monitoring conditions encountered counts
lIgnition counter
lCatalyst monitor completion counts bank 1
lCatalyst monitor conditions encountered counts bank 1
lCatalyst monitor completion counts bank 2
lO2 sensor monitor completion counts bank 1
lO2 sensor monitor condition encountered counts bank 1
lO2 sensor monitor completion counts bank 2
lO2 sensor monitor condition encountered counts bank 2
lEGR and/or VVT monitor conditions encountered counts
lEGR and/or VVT monitor completion condition counts
lAir monitor completion condition counts(secondary air)
lAir monitor conditions encountered counts(secondary air)
lEVAP monitor completion condition counts
lEVAP monitor conditions encountered counts
lSecondary O2 sensor monitor completion counts bank 1
lSecondary O2 sensor monitor conditions encountered counts bank 1
lSecondary O2 sensor monitor completion counts bank 2
lSecondary O2 sensor monitor conditions encountered counts bank 2
Etc

7.Vehicle Status
lProtocol
lEngine
lMIL status
lCodes found
lMonitors N/A
lMonitors OK
lMonitors INC
Etc

  8.Instrument lights
Give user information about the signal meaning on instrument
lBrake system
lAnti-lock brake
lBrake pads
lEngine coolant
lEngine oil pressure
lBattery charging
lAirbag & seat belt
lTraction control
lTire pressure
lMaintenance
lTransmission
lStability control
lService engine
lWasher fluid
lEsp fault
lGlow plug
lPower steering
lParking brake
lBrake fluid

9.PCBU inquiry
PCBU code is 5 characters, user can understand the fault code meaning through this function. The first character is P,C,B,U; the second character is 0,1,2,3; the others are 0-9, A-F.
 
Package includes:
 
1pc x Tabscan T2 Portable Smart Diagnostic Box

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks