Thursday 20 July, 2017 | RSS Feed

Step by step guideline of install Xprog m V5.70 on win7

by OBD2cartool.com

Step by step guideline of install Xprog m V5.70 ecu programmer on Win 7


Xprog m box 5.7 is only version XPROG-M which can decrypt new version BMW CAS4. Latest Xprog V5.70 software has not operating system limitation. Here obd2cartool.com will share you instruction on installing Xprog-M 5.7 with USB dongle on Windows 7 64-bit step by step.

 
Xprog 5.70 Auto ecu programmer Xprog m box 5.70 with XPROG-M V5.70 software

xprog m 5.7

software: v5.7.0
firmware: v3.9

 
Operating system:


Windows 7 Professional 64 bit operating system
4.00GB RAM
No network connection and anti-virus program !!!

 
Ready to install XPROG 5.7.0:


Open DVD disk (D:)
Copy all files to Desktop, ready for use


Part 1 – Install Adobe Reader XI


Run AdbeRdr11000_zh_CN application to install
Preparation steup…
Click Next
Auto install, click Install
Installing Adobe Reader XI…
Adobe Reader XI installation success. Click Finish

install xprog m 5.7

 

Part 2 – Install Registry Editor


Run The registry
Yes to continue
Keys and values have been successfully added to the registry. Click OK


install xprogm 5.7

 

Part 3 – Install driver software and computer management setup


Open folder XPROG-BOX5.7.0English on Desktop
Then open XPROG-BOX5.7.0English-> XProgDesktop application
Accept the agreement
In the xprog-m v5.70, you will find that Port Undefined
The system also prompts “Device driver software was not successfully installed”


install xprog m 5.7


Click the prompt info (xprog box: no driver found) and click Close
Open Computer Management
Select Device Manager-> XPROG-BOX
Right click for Update Driver Software…


install xprog m 5.7


Browse my computer for driver software manually
Browse Desktop/ XPROG-BOX drive/ WINDOW 7
Then OK.. Next
Install this driver software anyway
Windows has successfully updated your device software. Click Close


install xprog m 5.7


Back to Computer Management
Select Device Manager-> Other Device-> USB Serial Port
Right click for Update Driver Software…


install xprog m 5.7


Browse my computer for driver software manually
Browse Desktop/ XPROG-BOX drive/ WINDOW 7
Then OK.. Next
Install this driver software anyway
Windows has successfully updated your device software for XPROG-BOX programmer (COM3). Click Close

install xprogm 5.7


In Computer management, Ports (COM & LPT)-> XPROG-box programmer (COM3)


install xprog m 5.7


In xprog m software v5.7.0, Port COM3 (XPROG-box)


install xprog m 5.7

 

Part 4 – Run XPROG 5.70 software


XPROG-BOX 5.60 programmer read and write MCU MC68HC908GR16_FLASH+security


install xprogm 5.7

Done!





Xprog Box v5.76 v5.70 v5.60 v5.5 Difference and similarity

by OBD2cartool.com

Xprog Box v5.76 v5.70 v5.60 v5.5 Difference and similarity


XPROG is an universal car ECU Programmer,supports more than 500 units, and the latest XPROG box 5.76 supports CAS4 5M48H and new adds other authorization, including: serial EEPROM’s, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others). What’s new in Xprog box 5.76 programmer & what’s the differences among xprog box (xprog m) v5.76 v5.70 v5.60 v5.5. Here obd2cartool.com will share you differences and similarities between them.


Xprog 5.70 Auto ecu programmer Xprog m box 5.70 with XPROG-M V5.70 software

xprogm v5.7

Part 1: Similarities of Xprog programmers


Xprog m programmer v5.76 v5.70 v5.60 v5.5 all share the authorization as below:


AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014


Part 2: Differences among Xprog box v5.76 v5.70 v5.60 v5.5


Xprog box 5.76 adds new authorization:
(the programmer is coming soon)
MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM
MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH
MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64
Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash
Other ECU ->GM ECU->SAF-XC164CS-16F
Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash
Other ECU ->Renault ClioOther ->EPS_ST10F269
Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F
Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0
Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash
XPROG v5.70 adds new MCU/MPU:
MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM
MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH
MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64
Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash
Other ECU ->GM ECU->SAF-XC164CS-16F
Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash
Other ECU ->Renault ClioOther ->EPS_ST10F269
Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F
Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0
Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash
XPROG v5.60 ECU Box adds new EEPROM / MCU/ECU:
9S12XEP768 P-FLASH, D-FLASH, EEPROM (AUTH-0024-2)
9S12XET256 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3)
9S12XEQ384 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3)
9S12XEP768 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3)
9S12XEP100 SECURITY P-FLASH, D-FLASH, EEPROM (AUTH-0024-3)
XC2361A-56 FLASH3  (AUTH-0023-2)
MC9S12XDP512 0M23S
MAC7241 write bug fixed (AUTH-0023-1)….
Xprog-m 5.5 adds ic device list:
MCU/MPU  SPC560 serial
SPC560P44Lx_Code_Flash
SPC560P44Lx_Code_Flash_Test
SPC560P44Lx_Code_Flash_Shadow
SPC560P44Lx_Data_Flash
SPC560P44Lx_Code_Flash_Block
SPC560P50Lx_Code_Flash
SPC560P50Lx_Code_Flash_Test
SPC560P50Lx_Code_Flash_Shadow
SPC560P50Lx_Code_Flash
SPC560P50Lx_Code_Flash_Block
Freescale MPC5xx
MPC
MPC->Configuration-A
MPC->Configuration-B
MPC->External Flash
MPC->External EEPROM M95xxx
MCU/MPU
Freescale 9s12XHY
MC9S12XHY256 D-Flash
MC9S12XHY256 P-Flash
Freescale (Mac7xxx)
MAC7111VAG50_Flash
MAC7111VAG50_Data_Flash
MAC7112VAG50_Flash
MAC7112VAG50_Data_Flash
MAC7116VAG50_Flash
MAC7116VAG50_Data_Flash
MAC7131MVF_Flash
MAC7131MVF_Data_Flash
MAC7241VAF64_Flash
MAC7241VAF64_Shadow_Flash
MAC7242VAF64_Flash
Freescale 9S12XS-secured
MC9S12XS128_D-Flash-Secured
MC9S12XS128_P-Flash-Secured


In summary, the newer Xprog programmer software, the more powerful. It depends on what you need. If old xprog versions are ok for you, you can buy a cheap xprog 5.5 or even earlier versions and save money. But if it’s used for repair work, the newest xprog v5.76 should be the best choice for you.






News for Wednesday 19 July, 2017


View all news for Wednesday 19 July, 2017 on one page




Recent News




News archive

  • Online Tracking Packages

    All packages have online tracking number
  • Customer Protection

    100% Full Refund if you don't receive your parcel
  • Available Payment Term

    PayPal, Visa/MasterCard, Western Union, Bank Transfer...
  • Service Guarantee

    Free Technical support, One year warranty