BENZ IVECO DAF MAN Scania Volvo EURO 6 AdBlue Emulator is professional AdxBlue (SCR) emulators for DAF/VOLVO/SCANIA/MAN trucks. New SRS AdBlue Emulator DAF/ VOLVO/ SCANIA/ MAN EURO 6 can use to trucks and other Euro 6 transport. obd2cartool.com Man EURO 6 AdBlue Emulator is possible to disable AdxBlue system by installing an AdxBlue emulator.

BENZ IVECO DAF MAN Scania Volvo EURO 6 AdBlue Emulator New SRS DAF/VOLVO/SCANIA/MAN EURO6 AdBlue Emulator

AdBlue emulator EURO 6 for choose:
Option1：Newest Truck Adblue Emulator for MAN Euro6 Truck adblue Emulator 
Option2：Newest Truck Adblue Emulator for Mercedes Benz Euro6 adblueOBD2 Emulator
Option3：Newest Truck Adblue Emulator for Scania Euro6 Adblue Emulator
Option4：Newest Truck Adblue Emulator for Euro6 Volvo FMX FH FM Series Emulator 
Option5：Newest Truck Adblue Emulator for DAF Euro6 Adblue Emulator
Option6：Newest Truck Adblue Emulator for IVECO Euro6 Adblue Emulator

Note： Check the Connect wires of the emulator for different Trucks!!

EURO6 AdBlue Emulators Disable system:

– AdxBlue system (Fully)
– AdxBlue NOX sensor
– DPF system
– DPF temperature sensors
– DPF regeneration
 

After installing Euro6 emulator, you can remove:

– DPF sensors – YES
– NOx sensor – YES (only in DAF don’t remove first NOx sensor !!!)
– Adblue temp. sensor (s) – YES
– Adblue pump – YES
– Adblue level sensor – YES
– Adblue ECU – YES

kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.

EURO6 AdBlue Emulators using guide:

If you want to reduce the consumption of AdxBlue in your trucks or even completely disable it’s function, best solution is to install Adxblue-off emulator. We recommend Generation II.
The benefits of this are that you can reduce the consumption of AdxBlue, which makes using genuine AdxBlue far more affordable, or simply remove the whole system completely.

This process will not leave any traces of inactive AdxBlue system.

Mulator Man Euro 6 not need to be learned. We Mount emulator under the metal cover of AdBlue Pump. On the right side behind the cab. We need disconnect plug from AdBlue Pump and connect emulator.

Next we need to remove the fuses:

F894(Multisensor In AdBlue tank)
F738 (+30 Signal of AdBlue pump)
F1084(NOx sensor Upstream)

Fuse F737 is now fuse of emulator.

Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor need to work correctly for DPF regenaration.

The last thing that we need to do is remove Power from NOx downstream sensor. There is two way to do that. Cut pin 1 in NOx sensor plug. The second way (better) is remove pin 10 in X3212 plug. This plug is visible on rear of engine, right side. This is TE plug (16 pin) wiht yellow key.