MPC5200CVR400B MPC5200 BGA272 MPC5200CVR400 controller

MPC5200CVR400B MPC5200 BGA272 MPC5200CVR400 controller
Product Name

MPC5200CVR400B MPC5200 BGA272 MPC5200CVR400 controller

  • Model: IC094
  • Shipping Weight: 0.15kg
  • Units in Stock: 1000

Price:   $38.00

0 Reviews            
  • Details
  • Order History
  • Reviews
  • Shipping&payment
  • Tags
  • FAQ

NXP  MPC5200CVR400B  IC, MPU, 32BIT, 400MHZ, 272PBGA,it is can use for CWMPCEVB5200BE  Lite5200B Evaluation Board,Universal Multilink Development Interface Debugger / Programmer, MB SD C4 Board...


MPC5200CVR400B MPC5200 BGA272 MPC5200CVR400 controller


MPC5200CVR400 Key features are shown below.


• MPC603e series e300 core
– Superscalar architecture
– 760 MIPS at 400 MHz (–40 o
C to +85 o
C)
– 16 KB Instruction cache, 16 KB Data cache
– Double precision FPU
– Instruction and Data MMU
– Standard and Critical interrupt capability
• SDRAM / DDR Memory Interface
– Up to 133 MHz operation
– SDRAM and DDR SDRAM support
– 256 MB addressing range per CS, two CS available
– 32-bit data bus
– Built-in initialization and refresh
• Flexible multi-function External Bus Interface
– Supports interfacing to ROM/Flash/SRAM memories or
other memory mapped devices
– 8 programmable Chip Selects
– Non-multiplexed data access using 8-/16-/32-bit databus
with up to 26-bit address
– Short or Long Burst capable
– Multiplexed data access using 8-/16-/32-bit databus
with up to 25-bit address
• Peripheral Component Interconnect (PCI) Controller
– Version 2.2 PCI compatibility
– PCI initiator and target operation
– 32-bit PCI Address/Data bus
– 33 and 66 MHz operation
– PCI arbitration function
• ATA Controller
– Version 4 ATA compatible external interface—IDE Disk
Drive connectivity
• BestComm DMA subsystem
– Intelligent virtual DMA Controller
– Dedicated DMA channels to control peripheral
reception and transmission
– Local memory (SRAM 16 KB)
• 6 Programmable Serial Controllers (PSC)
– UART or RS232 interface
– CODEC interface for Soft Modem, Master/Slave
CODEC Mode, I2S and AC97

– Full duplex SPI mode
– IrDA mode from 2400 bps to 4 Mbps
• Fast Ethernet Controller (FEC)
– Supports 100Mbps IEEE 802.3 MII, 10 Mbps IEEE
802.3 MII, 10 Mbps 7-wire interface
• Universal Serial Bus Controller (USB)
– USB Revision 1.1 Host
– Open Host Controller Interface (OHCI)
– Integrated USB Hub, with two ports.
• Two Inter-Integrated Circuit Interfaces (I2C)
• Serial Peripheral Interface (SPI)
• Dual CAN 2.0 A/B Controller (MSCAN)
– Implementation of version 2.0A/B CAN protocol
– Standard and extended data frames
• J1850 Byte Data Link Controller (BDLC)
• J1850 Class B data communication network interface
compatible and ISO compatible for low speed (<125 kbps)
serial data communications in automotive applications.
• Supports 4X mode, 41.6 kbps
• In-frame response (IFR) types 0, 1, 2, and 3 supported
• Systems level features
– Interrupt Controller supports four external interrupt
request lines and 47 internal interrupt sources
– GPIO/Timer functions
Up to 56 total GPIO pins that support a variety of
interrupt/WakeUp capabilities.
Eight GPIO pins with timer capability supporting input
capture, output compare, and pulse width modulation
(PWM) functions
– Real-time Clock with one-second resolution
– Systems Protection (watch dog timer, bus monitor)
– Individual control of functional block clock sources
– Power management: Nap, Doze, Sleep, Deep Sleep
modes
– Support of WakeUp from low power modes by different
sources (GPIO, RTC, CAN)
• Test/Debug features
– JTAG (IEEE 1149.1 test access port)
– Common On-chip Processor (COP) debug port
• On-board PLL and clock generation

Important Links
  • Online Tracking Packages

    All packages have online tracking number
  • Customer Protection

    100% Full Refund if you don't receive your parcel
  • Available Payment Term

    PayPal, Visa/MasterCard, Western Union, Bank Transfer...
  • Service Guarantee

    Free Technical support, One year warranty