MST-12000 ECU Signal Simulation and Auto Sensor test platform

MST-12000 ECU Signal Simulation and Auto Sensor test platform
Product Name

MST-12000 ECU Signal Simulation and Auto Sensor test platform

  • Model: SDT058
  • Shipping Weight: 100kg
  • Units in Stock: 495

Price:   $1,893.00

0 Reviews            
  • Details
  • Order History
  • Reviews
  • Shipping&payment
  • Tags
  • FAQ

MST-12000 universal Auto ECU Signal Simulation platform is Automotive Test Platform and ECU Signal Simulation,  MST-12000 ECU Signal Simulation and Auto Sensor test platform is an very useful tool for professional technician during car ECU reparing.



MST-12000 ECU Signal Simulation and Auto Sensor test platform and ECU Signal Simulation


Feature of MST-12000 Automotive Test Platform:
1. The all cars crankshaft signal simulation expert:
Twelve way set arbitrary waveform output, can produce all of today's car engine crankshaft, camshaft signal (Hall, magnetoelectric, photoelectric signal), waveform data will be pre-served by computer for long term.
 
2. All magnetoelectric crankshaft signal will be isolated by transformer, ensure no interference between signals.
 
3. The whole series of car sensor signal simulation expert:
The rotational speed signal, the speed signal (Hall, magnetoelectric, photoelectric signal), the ABS wheel speed signal, oxygen sensor signal, throttle valve, the accelerator
pedal signal, air flow meter, the intake pressure sensor (analog, digital), knock sensor etc signals simulation.
 
4. The All cars actuator drive experts:
Tachometer, odometer, blower control module, ignition module, frequency and pulse width control solenoid valve, car audio power amplifier.
 
5. The All cars actuator simulation expert
Diesel common rail injector, rail pressure control valve, ignition coil, injector, idle stepper motor, ultrasonic generator,etc actuator simulation.
 

MST-12000 Automotive Test Platform Fuctions:
The user can set crankshaft of different types according to different independent engine control system
1). The signal output (applicable to all car models of computer driven)
2). Automatic transmission input/output shaft signal simulation
3). Set to write into the waveform data directly
4). Engine revolving speed signal output
5). The speed signal output (hall signals, magnetoelectric)
6). Three or four channel ABS wheel speed signal output
7). Computer board working current test
8). EGR solenoid valve simulation
9). CANP Canister Purge solenoid simulation
10). Tachometer simulation and drive
11). Blower control module driver
12). Auxilliary air regulator simulation        
13). Stepping motor simulation(Four/Six line)
14). Fuel injector simulation
15). Ignition coil simulation
16). The ignition module simulation
17). Reversing radar (ultrasonic) probe drive
18). The shift valve of automatic transmission simulation
19). Diesel injector simulation
20). Rail pressure regulator simulation
21). Shift quality valve simulation
22). Oil pressure regulating valve simulation
23). Water temperature, air temperature, outdoor temperature and evaporation temperature sensor signal simulation
24). Oxygen sensor signal simulation (manual)
25). The accelerator pedal double channel signal simulation        
26). Throttle signal simulation
27). CANP Canister purge solenoid simulation
28). Air flow meter,manifold Absolute Pressure Sensor (analog, digital) signal simulation
29). Brake switch simulation
30). Clutch switch simulation
31). AC request signal simulation
32). AC relay simulation
33). Fule pump relay simulation
34). Radiator fan relay simulation
35). Audio signal output, power amplifier drive
36). Steering pressure switch simulation
37). Fuel injection pulse width measurement
38). Central door lock server simulation
39). Anti theft resistance simulation
40). Knock sensor signal simulation
41). Computer board working current test
42). User extensional functions
 

MST-12000 Instrument parameters:
1. Can set the waveform output: It can set twelve channels waveform output arbitrary, can simultaneously output crankshaft 1 º angle signal, the signal of cylinder detection,
TDC of cylinder 1 signal, camshaft signal, phase precision.This machine is applied to crankshaft and camshaft signal simulation of all vehicles worldwide; also applies
to the crankshaft and camshaft signal input, output simulation,and all of the automatic transmission input, output shaft signal simulation; ABS three or four channel wheel
speed signal simulation; computer set the waveform, and waveform can be long-term preservation;
2. Output signals: magnetoelectric signals, hall, photoelectric signal;
3. Duty cycle drive: duty cycle 1 ~ 99% continuous adjusting,frequency of 11 files regulation
4. The sensor signal simulation: resistance of 100 Ω ~10000 Ω voltage 0V~5V × 4 0V~1.5V    
5. Actuator drive simulation: 69 channel output simultaneously
 

MST-12000 ECU Signal Simulation application:


1. Automobile sensor dynamic diagnosis, automobile engine, transmission, ABS, air conditioning, anti theft  and  other  computer repair,  auto teaching AIDS model driven, automobile production development;
2. The utility model is suitable for Germany, the United States, Japan, South Korea, and other domestic mini models etc hundreds of models
 

Operation user manual of MST-12000:


mst-12000-ecu-signal-simulation-operation-panel-profile.pdf
 

Output port: the above of the port said the abbreviation of the port name and the below is the port number (1-192) a total of 192 output ports.
INJ1-INJ12 (port 81-86,113-118): making 1-12 cylinder injector and injection time (MS) (12V,gasoline)
SV1 (H) -SV6 (H) (port 129-134), SV1 (L) -SV6 (L) (port 145-150) diesel injector signal output (24V)
 

Analog output:
IATS: ( Port155 ) air charge temperature sensor 0-5V
THW:( Port156) water temperature sensor 0-5V
TPS1:( Port143) Throttle position sensor signal simulation 0-5V
TPS2: ( Port144) Throttle position sensor signal simulation ratio control 0-5V,used to adjust two throttle signal output ratio. If two throttle position sensor signals need to be 2:1, then adjust TPS1 output voltage to 1v, TPS2 0.5V. And then adjust the voltage of TPS1,  two signals can be 2:1.
MAP:( Port158) Air intake pressure sensor signal simulation 0-5V
MAF:( Port57) Air flow meter signal simulation 0-5V
EGOS1:( Port141) Oxygen sensor signal simulation 0-1V
EGOS2:( Port 142) Oxygen sensor signal simulation 0-1V
LDFT:( Port151) Boost pressure sensor 0-5V
RPS; ( Port152) Fuel rail pressure sensor 0-5V
OPTS:( Port153) oil pressure sensor 0-5V
FTS: ( Port154) oil temperature sensor
 

Digital signal output:
DS1:( Port135) knock sensor 1 signal simulation
DS2:( Port136) knock sensor 2signal simulation
 

CH0-CH7: ( Port41-48) The camshaft & crankshaft square wave signal
CH8-CH11: ( Port33-40) The camshaft & crankshaft ac signal( This feature requires a PC through good software calibration input signal of the crankshaft. Click on a host "OUT" knob it can be output )
 

Components of simulation:
IACV: ( Port140 ) Idle speed control valve displacement simulation
PMR: ( Port135 ) pump relay fuel pump relay
EFI: ( Port136 ) main relay
MIL1: ( Port121) ] indicator light1
MIL2: ( Port122 ) indicator light 2
EGR: ( Port123 ) exhaust gas recirculation
EVP: ( Port125 ) CHARCOAL CANISTER-PURGE VALVE
AC: ( Port126 )Air Conditioner Relay
FAN1: ( Port127) ELectric fan relay 1
FAN2: (Port128) ELectric fan relay 2
 

M4: ( M4Port Area, Port93、94、109、110 ) Four wire stepper motor simulation
M6: ( M6Port Area, Port95、96、111、112) Six line stepper motor simulation
 

ZME1: ( Port79-80 ) Rail pressure regulator 1
ZME2: ( Port63-64 ) Rail pressure regulator 2 ( standby application )
 

Ignition coil and ignition module simulation (B1-B6)
 

IG1 (L) -IG4 (L): (port 103-106) ignition coil and ignition module, indicator light negative
 

IG1 (H) -IG6 (H): (port 87-92) ignition coil and ignition module, the indicating lamp is triggered
IGF (port 139) ignition feedback signals
 

IGC1, IGC2: (port -107-108) ignition coil simulation:
 

Electromagnetic valve simulation:
SOL1 - SOL8,49 (port 65-65-56)(12V)
 

SOL1 (L) -SOL6 (L) (port 80-82,97-99) (24V)
SOL1-SOL6 (port 73-78,57-62)
 

The power supply part:
OBD diagnosis:
 

Digital Signals:
 

Triggered Relay:
 

Tachometer Signal:


Wave setting software installation and use method:
Firstly, pls put the CD into the computer cd-rom,and open the software then copy the "simulation expert official version.Exe" file to the computer desktop and double-click the file,Double-click to open the desktop icon, the followings appear:
step1 of wave setting software installation and use
Click on the "signal editing", enter the signal editing interface.
step2 of wave setting software installation and use
Any set zone can be setted the waveforms you need arbitrary,CH0 is the tachometer channel, every 1 revolutions of the engine crankshaft, the channel 6 pulse.
CH1 -- CH7 is mainly used for square wave set, CH8-CH11 is mainly used for sine wave set. After the waveform set, input the waveform end position that we set the  in the "hase" menu.
For example: editing a 36-2 square wave crankshaft signal in CH1, and repeat the cycle.
In the CH1 click 36 pulse continuous.
step3 of wave setting software installation and use
2. In thirty-sixth pulse position as the phase 72. In the "hase" input "72"
step4 of wave setting software installation and use
3. Between 36 pulse,remove two pulse at random and continuously, you can get 36-2 signal.
step5 of wave setting software installation and use
4. With the end phase number of 726=12, that means every 12 phase then click a pulse in CH0 ,can be set to the tachometer signal.
step6 of wave setting software installation and use


Package list:


1 set x The MST-12000 sensor signal simulator          
60 pcs x The data line                               
1 pcs x Power line                                 
1 pcs x The USB data line                           
1pcs x Data disc 


OBD2cartool After-Sale Service:

 

Technical Support: Free

 

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

 

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@yahoo.com, we will give you best discount for long-term cooperate.

 

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

 

Shipment Note:

 

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

 

How to make order on OBD2cartool.com?

 

shopping process

 

Notice: After you place order, pls reply confirm email send by obd2cartool@yahoo.com asap for us to arrange ship for you, thanks

Important Links
  • Online Tracking Packages

    All packages have online tracking number
  • Customer Protection

    100% Full Refund if you don't receive your parcel
  • Available Payment Term

    PayPal, Visa/MasterCard, Western Union, Bank Transfer...
  • Service Guarantee

    Free Technical support, One year warranty