Tuesday 26 December, 2017 | RSS Feed

Recommend Smart Key 3+1 Button 315Mhz and 433MHZ for Benz

by OBD2cartool.com


Recommend Smart Key 3+1 Button 315Mhz and 433MHZ for Benz

This Mercedes Benz smart 3+1 Button key board is made in China, it supports read and write key with Benz key IR Code Reader.

Smart Key 3+1 Button 315Mhz and 433MHZ for Benz
Benz Smart Key for choose:
Optional 1: Smart Key 3+1 Button with 315Mhz
Optional 2: Smart Key 3+1 Button with 433MHZ
Optional 3: Smart Key 3+1 Button with 315/433Mhz


It can work with VVDI BGA TOOL, support  all non smart key car types before 2015.
If Benz key board is broken during key writing, you need to buy another new NEC Chip and it can be written for once only.  

Support cars:
705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(2011+)

Smart key programmer:
AK500 MBE MB-KEY OBD2 NEC-57 MB-PRO...





INPA K+Dcan interface to Reset BMW E90 Battery in 3 ways

by OBD2cartool.com

INPA K+Dcan interface to Reset BMW E90 Battery in 3 ways


Inpa k+Dcan interface is professional bmw auto diagnostic usb interface. Here obd2cartool.com julie will share you how to use inpa kdcan interface to reset bmw e90 battery. There are 3 different methods of vehicle, Battery (IBS) reset can be done with BMW INPA K+DCAN cable.
 

For BMW INPA K+DCAN KCAN Ediabas INPA diagnostic interface with FT232RL Chip

inpa kdcan interface
Three methods to reset bmw e90 battery by inpa:


1. First Method


1 Select your car model
2 Select your engine type (MS or MSV in front of the engine type)
3 Select Status (F5)
4 Select PM-IBS (F5)
5 Click B Exchange (F5)
6 Popup (OK) should appear if job is done.


2. The second method


Step 1: select BODY from the left hand pop-up menu
Step 2: select POWER MODULE in the right hand list
Step 3: select ACTIVATE from the next menu
Step 4: Select ACTIVATE2 from the next menu
Step 5: Then select F7 – Register battery replacement. Almost instantly you get the message: “Register battery replacement Activated properly.”


3. The third method


In that case you open up Toolset 32 ​​(under EDIABAS folder):
1. Open MSD80.prg
2. Look up steuern_batterietausch_registri. (near bottom of job list)
3. Go to Jobs menu
4. Select Run Job
Use ncs expert to change the ampere to 70ah -> 90ah in the CAS module.
Battery reset is available only in INPA.
After clicking STATUS button, click PM-IBS second state B, and press amperage and battery old
You can see the current charge.
Press B change to change the battery and press reset to reset the IBS intelligent battery system.
If you look at status B, the old status is changed to 0 and the battery run is reset.
I have not tried it yet … You can try it yourself.

 






News for Monday 25 December, 2017


View all news for Monday 25 December, 2017 on one page




Recent News




News archive

  • Online Tracking Packages

    All packages have online tracking number
  • Customer Protection

    100% Full Refund if you don't receive your parcel
  • Available Payment Term

    PayPal, Visa/MasterCard, Western Union, Bank Transfer...
  • Service Guarantee

    Free Technical support, One year warranty