Saike 852D+ is 2 in 1 SMD Rework station from obd2cartool, Saike 852D+ soldering Iron with LED indicator, 220V/110V Saike 852D+ 2 in 1 hot air rework station Iron with LED digital display accurancy 1°C.
SAIKE 852D+ Digital hot Air Rework station Soldering Iron
Optional 1: 220V Saike 852D+ 2 in 1 hot air rework station
Optional 2: 110V Saike 852D+ 2 in 1 hot air rework station
Optional 3: 220V Saike 852D++ 2 in 1 hot air rework station,it is update from 852D+, Electrical properties more stable and reliable
1,852D++ 852D+ is on the basis of circuit board performance, structure and packaging are optimized, more stable and reliable electrical performance, circuit structure and packaging structure is more reliable, greatly reducing the damage caused by the transport process.
2, the precise digital air gun and soldering temperature, display power, rapid heating, no air, truly lead-free welding demolition.
3, handle with sensitive magnetic sensor, just pick up the handle, the air gun is quickly enter the working state; the handle on the handle frame, air gun will stop heating into the delay blowing stop working after cooling, the display window display (Hei Ping).
1, suitable for a variety of components desoldering such as: SOIC, CHIP, QFP, PLCC, BGA etc. (especially suitable for mobile phone cable and cable seat unsolder).
2, for heat shrinkage, drying, paint removal, removal, thawing, preheating, bull glue welding etc..
03 operating instructions
The state of air gun working indicator:
The lamp "lit" said air gun in a heating state;
The light does not shine, "said air gun is not heating stop working state;
Fan status indicator:
The light does not shine, "said fan in the hair does not stop working state.
Iron working status indicator:
The lamp "lit" said iron is a heating state;
Light "shining" said iron is under constant working state;
The light does not shine, "said iron is not heating stop working state;
(a) air gun part
1, the desoldering station is put, connect the air gun handle, the handle must be put in the handle frame, otherwise the air gun will not work (safety protection function, effectively prevent the unique air gun fire in other places or other accidents aside in unknown circumstances).
2, connect the power supply device, required air nozzle (as far as possible the use of large diameter nozzle or no wind.)
3, open air gun power switch, display window display "---" the air gun to standby.
4, after work, must be placed in the handle handle frame, automatically cut off the heating current at the air gun, into the cold air cooling heating mode, when the temperature is below 100 DEG C desoldering station display "---" said the machine will enter the standby state, when the heating temperature lower than 70 DEG C when the machine state (when there is intermittent breeze away, said heating body temperature is higher than 70 DEG C, only temperature lower than 70 DEG C when the true fan will stop working).
5, long-term operation, must turn off the power switch.
(b) iron parts
1, the iron handle connected, the handle on the iron stand in.
2, open the iron power switch, according to the set temperature in the heating process of iron, iron light lit, when flashing lights of the soldering temperature into the state, then it can work normally.
SAIKE 852D+ Hot Air Gun Station Specification:
OBD2cartool After-Sale Service:
Technical Support: Free
Wholesaler Discount: If you are wholesaler or reseller, pls send email to email@example.com, we will give you best discount for long-term cooperate.
Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.
Who Bought This Product.Total Items:4