SDP3 V2.24 VCI 2 is a Diagnostic Tool For Scania. Scania vci2 SDP3 work with latest Scania trucks, buses and other heavy vehicles. VCI 2 For Scania Truck supports the earlier systems in P, R, T series and K, N series vehicles and industrial and marine engines.

Scania vci2 SDP3 Diagnostic Tool VCI 2 For Scania Truck Without USB Dongle

Scania VCI 2 detail:

1. Software Verison: 2.24
2. Support Languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.
3. Updatable

Notice: Free Activation for One Time, for the Next Time It Will Cost 10usd.

Scania VCI2 SDP3 V2.23 Added Support for the Following Complete Numbers:
 

BWE
2300568
COO7
2437719
2437720
2437721
2437722
DIS
2432963
EMS
2422662
2432413
2432414
2432415
2432416
2445304
2445305
2445306
2445307
2445308
2445359
2445360
2445361
2445362
2445363
2445364
2445365
2445366
2445367
2445368
2445369
2445375
2445376
RTC
2430418
2430419
2430420
2430421
2430422
2430423
2430424
2434064
2434065
2434066
2434067
2434068
 

Solved the Following FQ Items:
 

FQ229423
 
The following C200 cpl.no are not possible to spare part program in truck;
2252122, 2256815, 2256818, 2256822, 2256823, 2424369
 
FQ229915
 
Brake wear control not visible in BMS ECU check
Affects all 4x2 wheel configuration vehicles
 
FQ229258
 
Not able to set correct vehicle speed limit for activation of PTO, Allison 2.
 
FQ229170
 
Not possible to spare part program BCI1_B1
Only when function parameter "Warning Battery main switch" is set to "Without".
 
FQ228412
 
Range for setting parameter "Increase in pressure to trailer" in SDP3 is incorrect.
Possible to choose parameters in SDP3 that are out of range and gives DTC and VOR after COO software update.
Range for setting parameter "Increase in pressure to trailer" in SDP3 is incorrect
See Adjustment tab; Chassis/Brake/Trailer coupling force control Value; Bar
 
FQ218438
 
Unclear information about Function Lamps flashing simultaneously is not available for all vehicles.
The instructions/guide is updated so it is clear for the user that Lamps flashing is NOT available for all vehicles.
 
FQ228873
 
Wizard Checking wastegate does not work as intended, see TMI PC-15 05 29
When there is any other fault in function of turbocharger, such as feed pressure is missing, the guide will always point valve block V107 as faulty. This is misleading and actions will not solve the problem for the customer.

Scania VCI SDP3 Description:

Scania VCI2 is a tool that is used together with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose and troubleshoot Scania heavy vehicles and trucks.

Scania VCI Feature:

Stored fault codes, proposals for remedial action and delete option.
Control unit configuration and settings.
Information about electrical components and their location.
Input and output signals.
Activation of components.
Spare part programming.
Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
Chassis data. The vehicle gives the program a description of itself and how it is configured.
User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.
Use of the program requires a PC and a VCI2. These components must comply with the applicable system requirements, so that the program will operate correctly.
After connecting VCI2 to the PC and starting SDP3, you can access information about VCI2 by opening the menu under View. This works regardless of whether VCI2 is connected to the vehicle or not.
VCI2 supports the earlier systems in P, R, T series and K, N series vehicles and industrial and marine engines.