Wellon VP-298S is a special programmer for serial EEPROM, Wellon VP390 specialized programmer is a high reliability, fast speed, high performance price ratio programmer, the operator will Load, edit and save the file is very convenient.

Wellon VP-298S special programmer Features:

Dimension:168*108*26mm
48 Pin ZIF socket with universal pin-drivers. 
Interface with LAPTOP, PC or compatibles through USB port 
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record 
Manages 16 and 32-bit word split (Set Programming) 
Features Test Vector capability and multiarray fuse map editor 
Optimum programming for each individual device
Device insertion and poor-pin-contact check 
Support 1.5v Low voltage devices 
Not need exterior adapter for mostly devices.
Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters
Auto-run mode starts programming automatically upon detection of chip insertion 
Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)
Supports ten languages,such as Chinese(Simplified),Chinese(Traditional),English,Korean,Poland,Italian,Portuguese，Dutch, Turkish and Hungary.

Option 1: Wellon VP-298S( Stop to produce version)

Supported device list: http://www.weilei.com.cn/VP-298Slist.htm

SeriesE(E)PROM.

Wellon VP-298S programmer updates:

WEILEI updates software and device algorithm regularly. You can get the latest software free of charge through interne

Package list:
 

Wellon VP-298S Universal programmer, cable, manual, software included

Warranty & Technical Support:
 

15 day moneyback guaranty, three year warranty, All Programmer Device is warranted to be free of manufacturing or workmanship defects for one year from the date of purchase. Technical support is available by email.

The Standalone mode is ideal for production environments not only because it doesn't require any technical skill to use, but for its security features. You can set up a passkey sequence that must be entered to begin programming, and can set it to require a passkey sequence after a set number of successful programming operations. This ensures against technological espionage, as you can keep track of exactly how many parts were programmed versus how many you have in production.

The programmer is designed using state-of-art hardware architecture with on-board high-speed CPU, RTOS, FPGA, CPLD and high-quality universal pin-drivers. The universal pin-drivers can route programmable precision voltage signals, GND and CLK to any pin. An FPGA provides full I/O signals (level programmable from 1.5V to 5V) to up to 48 pins. This makes the programmer truly universal: Both current and future 5V and low-voltage devices are supported. Different devices in the same package share one adapter. For example, the only QFP44 adapter (WL-TQFP44-U1) supports all MCUs, PLDs and memory. All DIL devices are supported directly with the standard ZIF48 socket.

Manufacturer-approved algorithms, precision and clean signals promise high programming yield. Algorithm waveform is generated by hardware offering 0.01V programming voltage resolution and 1-microsecond timing resolution. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state-machine architecture constructed with an FPGA to achieve an ultra-high programming speed.

Insertion and continuity check are performed before programming to protect devices from damage due to operator error. Over-current and over-voltage protection is enacted to each pin to protect the programmer hardware from damage due to bad chip short circuit and ESD.

The included WL-ISP-U1 in-system programming adapter's 10 flying leads are all labeled, so you can be sure that you're putting the correct wire on the correct pin when you need to program your devices in circuit.

Option 2: Wellon VP-398S(Updated version from VP-298S)

http://www.weilei.com.cn/vp398Slist.htm

VP398S is a special programmer for serial EEPROM. It is a high reliability, fast speed, high performance price ratio programmer.Support ten languages. Support WindowsXP/Windows 7/Windows 8 operating system. Load, edit and save the file is very convenient.

FEATURES:
Dimension:168*108*26mm,weight:300g.
48 Pin ZIF socket with universal pin-drivers.
Interface with LAPTOP, PC or compatibles through USB port
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record
Manages 16 and 32-bit word split (Set Programming)
Features Test Vector capability and multiarray fuse map editor
Optimum programming for each individual device
Device insertion and poor-pin-contact check
Support 1.5v Low voltage devices
Not need exterior adapter for mostly devices.
Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters
Auto-run mode starts programming automatically upon detection of chip insertion
Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)
Supports ten languages,such as Chinese(Simplified),Chinese(Traditional),English,Korean,Poland,Italian,Portuguese，Dutch, Turkish and Hungary.