Mercedes Benz C6 Xentry diagnosis DOIP VCI is the latest interface for Mercedes & SMART vehicles can replace MB Star C4/C5. OEM XENTRY Diagnosis VCI MB SD C6 Doip multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC, It is support online Star Diagnostic & programming (SCN Coding).

OEM Benz C6 Multiplexer  Mercedes Benz MD SD C6 Xentry diagnosis VCI C6 Doip with SDD ready to use
Mercedes Benz C6 OEM DoIP Xentry Diagnosis VCI Multiplexer with V2023.9 Software SDD, it is better than Benz VCMii case doip C6 .

Mercedes Benz Xentry diagnosis VCI DOIP C6 Overview:
1)Cannot support the old cars with DAS, only can use XENTRY to test new cars (such as ECOM)
2)The software offered with Deep Freeze. Need to be activated after restored
Note: XENTRY, VEDIMO, DTS, EPC/ WIS all need to be activated (Mercedes-Benz VCI C6 comes with keygen with SDD).
3)The software is equipped with dongle. The test must be plugged in dongle (dongle for later update).
4)Supports VEDIAMO and DTS Monaco software (have been tested OK).
5)Supports DoIP protocol
6)The software can be connected with WLAN and USB, but doesn`t support WiFi

Can be used all model series For new Mercedes Benz vehicles
Support DoIP cover more functions during online Star Diagnostic & programming (SCN Coding ) than MB SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

To support more old Mercedes Car and Truck , it is recommended to order a super-quality C4 together

Option 2:

Super MB Star C4 Wifi Sd Connect Mux C4 for Benz car truck 12v-30v Full Chip PCB MB SDC4

OEM MB Star Doip C6 Xentry diagnosis VCI Summary:

Mercedes Benz Xentry diagnosis VCI DOIP C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

  The Mercedes Benz Xentry diagnosis VCI DOIP C6 does not have its own PC core, battery, fan, or display. It is operated using the XENTRY Diagnosis Pad via a USB cable connection.

MB Star C6 Mercedes Benz Xentry diagnosis VCI Notice:

1. Please install the 256GB SDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship SDD back to us to copy software again.
2. There is actived in SDD , no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DOIP C6 can't support All Key Lost,needs one key at least.
4. This OEM Benz C6 Doip VCI not work with DAS, but will support on later upgrading

What is DOIP?

DOIP is ISO 13400 diagnostic protocol

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
Enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3

Such as mercedes Land Rover JLR all use this new Diagnostic Protocol now.

Where do you need DOIP device?

when we test mercedes new car like w222  w205

In AudioComand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

There with another cheaper Benz Doip VCI

DoIP BENZ ECOM Support Diagnosis and Programming for Latest Mercedes vehicle Till 2019

Package includes:

1set x OEM BENZ Doip C6 VCI with SDD

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@yahoo.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@yahoo.com asap for us to arrange ship for you, thanks