Elnec Beeprog programmer is Universal Device Programmer (with 48 Pin ZIF socket) in chinese market, Beeprog universal programmer supports over 71760 IC devices, Beeprog programmer support all devices in DIP with default socket, and non-DIP packages up to 48 pins with universal adapters.

BeeProg Universal programmer Chinese Beeprog Device Programmer

beeprog Universal programmer in chinese market,  STOP produced, pls choose Beeprog+
updated by email,  can't be updated by internet,  or the machine will be damaged.

If you beeprog progammer chip is broken,you can  repair PIC18F242 ic.  PIC18F242 IC with data, we have write the bin file to this ic, you just replace the old one on your beeprog progammer.Model: IC038

Functions of BeeProg Universal programmer
1. support all devices in DIP with default socket
2. package support includes DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, CSP, SCSP etc.
3. support devices in non-DIP packages up to 48 pins with universal adapters
4. programmer is compatible with third-party adapters for non-DIP support

Features of BeeProg Universal programmer
1.) 71760 supported devices by 2.42 version of SW (13. Sep. 2015)
2.) extremely fast programming, one of the fastest programmers in this category. Programs 16-Mbit Flash memory less than 18 seconds
3.) 48-pins powerful pindrivers, no adapter required for any DIL devices
4.) connector for in-circuit programming (ISP)
5.) dual connection to PC: USB or parallel (printer) port
6.) USB 2.0/1.1 compatible interface
7.) alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface
8.) comfortable and easy to use control program, Windows XP/7/8 x64 compatible
9.) Multiprogramming possible by attaching more programmers to one PC
10.) warranty - 1 years

BEEPROG Universal programmer summary
1. BeeProg Universal Programmer is the First member of new USB-compatible generation of Windows /XP/7/8 32bit or 64bit based ELNEC universal programmers built to meet the strong demand of the developers community for the fast and reliable universal programmer.
2. BeeProg Universal Programmer Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.
3. BeeProg isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.
4. BeeProg Universal Programmer Provides very competitive price coupled with excellent hardware design for reliable programming. Probably best "value for money"programmer in this class.
5. BeeProg Universal Programmer Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. At least fast than competitors in this category, for many chips much faster than most competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round.
6. BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers through USB (2.0/1.1) port or any standard parallel (printer) port. Programmer also supports IEEE1284 (ECP/EPP) high-speed parallel port. Support of both USB/LPT port connection gives you the choice to connect the BeeProg programmer to any PC, from latest notebook to older desktop without USB port

Beeprog eprom programmer Programming speed
--It is important to know, we always use random numbers pattern for programming speed testing. Some our competitors use "sparse" pattern, where only few non-Blak data are programmed or are there are used data with only few 0 bits (FE, EF, etc.). This cheating approach can "decrease" programming time considerable. If you plan to compare, ask always which pattern they use.
--The programming speed depends on PC speed only slightly.
--If the programmer attached to PC through LPT port, the programming might take longer.
BEEPROG Universal programmer Device/ Size [bits] Operation /Time
1.M50FW080 (parallel Flash) 100000Hx8 (8 Mega) programming and verify 22 sec.
2.AM29DL323DB (parallel Flash) 208000Hx16 (32 Mega) programming and verify 31 sec.
3.AM29DL640 (parallel Flash) 400080Hx16 (64 Mega) programming and verify 61 sec.
4.AT45D081 (serial Flash) 108000Hx8 (16 Mega) programming and verify 41 sec.
5.AT89C51RD2 (microcontroller) 10000Hx8 programming and verify 15 sec.
6.PIC18LF452 (microcontroller) 4000Hx16 programming and verify 4 sec.
7. Conditions: PC Pentium 4, 2.4 GHz, USB 2.0, Windows XP /7/8.

Package list:
1 X BeeProg programmer
1 X switching power adapter 100..240V AC/15V DC/1A
1 X connection cable PC-programmer, USB port
1 X ISP cable
1 X user manual and software (on CD)

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@yahoo.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@yahoo.com asap for us to arrange ship for you, thanks