Jeep Tazer JL Mini is an aftermarket tool for 2018+ Jeep JL Programmer . ZAutomotive Tazer JL Lite Programmer Can Be Accessed Using the Key Fob or In-Dash Display.   2018+ Jeep Mini ZAutomotive Jeep Tazer JL Programmer is Jeep Wrangler JL solution to changing your tire size, gear ratio, transfer case, TPMS and more.

Jeep Tazer JL Mini ZAutomotive Tazer JL Lite Programmer For 2018+ Jeep Wrangler JL

Mini Jeep Tazer JL Programming changing your 2018+ Jeep Wrangler JL tire size, gear ratio, transfer case, TPMS

Jeep Tazer JL Mini Features:

New 1 Piece Design
Adjust for alternate tire sizes up to 41''
Disable TPMS system if desired
Change front/rear TPMS warning PSI limit
Auto Traction Kill - can be set to turn off traction control upon start-up
Cooldown mode - run engine fans when Jeep is off, to aid in cooldown

What is Jeep Tazer JL Mini:

Mini Jeep Tazer JL Programmer is the aftermarket solution to changing your tire size, gear ratio, transfer case, TPMS and more. Priced at $199 it is twice the price of a dealer tune but if you plan to add parts gradually over time and will need several updates it easily pays for itself. Tuning is done via the OBDII port and a bypass module plugged into the SGW port. (The bypass module only needs to be installed during programming or while using the Live features. If the Tazer JL is removed the SGW bypass can be removed as well.)

Similar to the popular Tazer from Z Automotive, the Tazer JL Mini is an essential took for 2018+ Wrangler JL, and JLU owners! This simple plug and play programmer has two parts; the bypass module that is plugged in above the OBD2 module, and the Tazer JL itself that plugs directly into the OBD2 Module.

These are all accessed using the factory dash display using the steering wheel buttons to navigate the menus.

Simple, plug-in installation – simply unplug the SGW module and plug the Tazer JL Mini in its place.  Located above the OBD2 Diagnostic connector.

Fit: 2018+ Wrangler JL,
       2020+ Gladiator JT;
       All Trim Packages, Engines & Drivetrains

Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Tazer JL Mini Functions:

Customization at Your Fingertips. Modify your Jeep Wrangler JL’s functions in trouble-free ways with the ZAutomotive Tazer JL Lite Programmer. It lets you maximize your vehicle’s features when certain modifications are made to it, using the in-dash display or your key fob.

Hassle-Free Reprogramming: The Tazer JL Lite Programmer has been specially designed to provide you with trouble-free reprogramming of your Jeep’s crucial functions when certain modifications have been made to it. It adjusts your Jeep for alternate tire sizes of up to 41 inches, alternate axle gear ratios, and alternate transfer case LO range ratio.

Additional “Live” Features: In addition, when plugged in, the Tazer JL Lite Programmer lets you perform 6 pre-set light shows with your Jeep’s lights using the key fob or the on-screen menu. It also lets you disable your vehicle’s AutoStartStop feature upon turning it on. Other features include AutoPark Disable, Cooldown Mode, Winch Mode, and Clear Check Engine Light.

Heavy-Duty Design: Designed for heavy-duty use, this electronic programmer has been specially designed using high-quality materials to ensure longer lasting use.

Straight forward Installation: Installation of the Tazer JL Lite Programmer is a breeze. It plugs directly in place of your Jeep Wrangler JL’s Security Gateway module within minutes.

Application: This ZAutomotive Tazer JL Lite Programmer has been specially designed for all 2018 to 2019 Jeep Wrangler JL models.

Tazer JL features can be broken into two categories;

Vehicle Settings – which are changes made to the Jeep like tire size, gear ratios,or change settings to accommodate other upgrades or modifications. These changes will continue to operate after the Tazer JL Mini is unplugged.

Live Functions – which are functions the Tazer JL Mini performs live, only while plugged in.

Vehicle Settings:

– Change Tire Size
– Change Gear Ratio
– Change Transfer case LOW ratio
– Enable/Disable TPMS system
– Change TPMS pressure warning limit front/rear (25psi-85psi)
– Enable/Disable Backup camera
– Enable/Disable Cargo Camera input (8.4 Uconnect only)*
– Enable/Disable CD (wired audio) input*
– Enable/Disable TravelLink/XM traffic&weather
– Change Daytime Running Lights (DRL) region (type)
– Change DRL location
– Enable/Disable DRL Dropout function
– Enable/Disable factory fog lights
– Enable/Disable Fog Light Dropout (when Fogs shut off while High Beams are on)
– Enable/Disable Factory Halo lights (including BCM output for adding Halo’s)
– Enable/Disable One-touch lane change
– Change Headlight type (std/LED)
– Change Fog light type (std/LED)
– Change Taillight type (std/LED)
– Change Front Turn Signal type (std/LED) – supports aftermarket LED lights too
– Enable/Disable Trailer Tow setting
– Enable/Disable Aux Button settings
– Enable/Disable Blind Spot detection (if hardware added or removed)
– Enable/Disable/Change Parksense configuration
– Disable Electronic Sway Bar (if removed from vehicle)
– Disable Front Axle Disconnect module for axle swaps
– Disable Front and Rear Lockers for axle swaps
– Disable Electronic Steering Pump for hydraulic steering conversions
– Change cluster splash screen Wrangler/Sahara/Rubicon
– Enable/Disable PANIC button on remote
– One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock.

Live Functions:

– AutoStopStart disable – remembers last state of the auto stop start system and will set it for you the next time you start the vehicle
– AutoTracKill – remembers last state of traction control system and will set it for you the next time you start the vehicle
– Can disconnect sway bar in 2WD up to 30mph (any speed if button mapped SwayKill is used)
– Can use backup camera and added cargo/front/undercarriage camera or media player at any speed
– TurnCAM – automatic backup camera when turn signals are used (8.4 uconnect only)
– Dark Mode- Turns off all exterior lighting and dash/radio/shifter lights while parked with engine running.
– Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or
steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal
police/EMS.
– Axle Locker control (Rubicon) – Engage lockers in 2WD and 4Hi on demand.
– Sway Bar control in 2WD with automatic re-engagement at 30MPH
– SwayKill – Disable sway bar on demand in any drive mode, any speed.
– TC Kill – Tuns off traction control, stability control and ABS.
– Hood Alarm – When the vehicle theft alarm is armed, monitors hood activity and will sound
the alarm and flash light shows if opened.
– Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running
– Line Lock: Can lock front brakes for an easy burnout
– Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle
still, especially helpful when off-road.
– Winch Mode: Raise idle to 2000 RPM with a simple button press.
– Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer
JL’s functions, when cruise control is off.
– Clear CELs – Reset that pesky check engine light. Good when you have mods that set the
light and you know exactly why.
– 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display
– Firmware updates – new firmware is available periodically, always free!

There are two sets of features – those program the vehicle to accommodate modifications made to the Jeep, and “live” features..

Settings – once the Tazer is “married” to the Jeep, the following menus can be accessed. Unmarrying the Tazer JL will bring the settings back to stock.

Perf menu:

Adjust for alternate tire sizes up to 41″
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio

TPMS menu:

Disable TPMS system if desired
Change front/rear TPMS warning PSI limit

Radio menu:

Disable Backup camera
Enable Cargo/front/undercarriage Camera input
Enable CD audio input
Disable TravelLink (weather warnings included)

Lighting Menu:

Change DRL region (type)
Change DRL location
Disable DRL Dropout
Enable Fog lamp output
Disable Fog lamp dropout
Disable Halo’s
Set LED 3rd brake light type
Set LED tail lamp type
Set LED front turn signal type
Set Trailer Tow output for use with Mopar kit

Other menu:

Disable/Enable Electronic sway bar – for axle swaps or to run disconnected at any speed or drive mode
Disable/Enable Front Axle Disconnect
Disable/Enable Front and Rear Lockers
Enable Aux switch settings on the radio
Enable Blind spot detection (sensors required)
Change cluster splash screen to Wrangler/Sahara/Rubicon
Enable/Disable PANIC button on remote

Live features:--- - these run only while the tazer is plugged in:

Light shows: Can be accessed from the key fob or from the on-screen menu. 6 pre-set light shows and 3 make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.

Disable Navigation in-motion lockout – enter addresses while the vehicle is moving
Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time
Auto Traction Kill – can be set to turn off traction control upon start-up
Auto StopStart Disable – can be set to disable AutoStopStart upon vehicle start-up
AutoPark Disable – can override the AutoPark system
TurnCAM – can turn on backup camera whenever turn signals are used (great for when the doors are off)
0-30 and 0-60 timers
Cooldown mode – run engine fans when Jeep is off, to aid in cooldown
Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
Clear Check engine light

Mini Tazer JL Lite FAQ:

Q: Will the Tazer JL lite allow me to set up the Mopar Aux switches??
A: This will work with the Key Fob or In-Dash Display, it does not allow for use of the Aux switches.

Q: What is the firmware version?
A: The newer firmware will be available for free as it comes out.

Q: Auto Stop/Start on and off option?
A: This will have a live function adjustment for the Auto Start/Stop.

Q: Are you able to do the light show with the lite?
A: Yes, this does have a light show mode.

Q: Does the lite have the hood alarm feature?
A: This item does not have a feature for a hood alarm. 

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks