VAG COM Interface is latest full active vag diagnostic cable.  VCDS full active cable support For VW Audi Seat Skoda till 2017 model. VAG COM 19.6.2 hex can usb interface very easy to install and Running very stable, it is with Automatic recovery function  .

Stable vag com VCDS 19.6.2 full active Vag hex can cable
Newer VAG COM 18.9 interface For VW Audi Seat Skoda

Note:  Free shipping we default send out by registered post mail, you can get parcel in about 7-30days.

VAG COM VCDS 18.2.0 Features:

Language: For choose
Software Version: VCDS 18.2 or VAG COM 18.9.0
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)
Only one VCDS 18.2 program on CD,install just click next till finish .

Stable vag com Language for Choose:

Option 1:  VAG COM 18.2 or 18.9 English version
Option 2:  VAG COM 18.2.1 or 18.9 German Deutsch version or DE 19.6.2
Option 3:  VAG COM 18.2.1or 18.9 Romania România version
Option 4:  VAG COM 18.2 or 18.9 Danish Dansk version
Option 5:  VAG COM 18.2 or 18.9 French français version or FRM 19.6.2 
Option 6:  VAG COM 17.8.1 or 18.2.1 Spanish Español version

How to work with VAG 18.2 software? Very easy!!
Please do as these steps:
1. Run CD vag com 18.2 software
2. Click next till finish, not run software,just close it
3. Plug cable with computer and car, run vcds 18.2 , do test
all done

Note: This VAG 18.2 version only one software on CD, no need loader or active, very easy to install!!

VCDS 18.2 New added functions compare VAGCOM 17.1.3:

-Support for MLB2 platform cars (HEX-NET interface recommended)
-Support for 2016 and early model cars
-Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
-Improvements in Advanced Measuring Value Selection Window
-Display of factory identifiers instead of arbitrary location numbers
-Support for Six-Digit security access codes
-HEX-NET Turbo and other speed optimizations
-Optimized low-level timing routines and CPU core affinity
-Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
-Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
-Fixes SRI reset in newer Crafter instruments.
-New ASAM data and Label Files
-Support vehicle list: For AUDI VW SEAT SKODA

 
Vagcom 18.2 New Features:

Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module

Compared to the previous version, the VAG 18.2 main changes is BUG fixes and improvements.

Vag com 18.2 Basic functions

00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
       Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
       Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
10 matching
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function

The appropriate diagnostic cable to connect the computer to the vehicle and turn the ignition switch of the vehicle, but it is not necessary to start the engine.

Click the [System Configuration], and then select the correct communications port
Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
Then click [Save]

You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list

VAG COM 18.2 Packing List:

1 x Vagcom 18.2 diagnostic cable
1 x  VCDS 18.2 software CD

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks