Mini CN900 Transponder with TOYO Key OBD II Support Toyota G Chip All Key Lost and Toyota H Chip All Key Lost. Mini CN900 Transponder with TOYO Key OBD II can program 4C 46 4D 48 G H Chips.

Mini CN900 Transponder CN900 mini Key Programmer Plus TOYO Key OBD II TOYO Key Pro for 4C 46 4D 48 G H Chips
 

Smart CN900 Mini transponder Programmer :

1. Support copy 4D chips.
2. Support copy 46 chips.
3. Support 72G chip.
4. Can directly copy 4C and other chips like Toyota 4d67.
5. Can recognize locked ID48 and can unlock ID48.

CN900 Mini Highlights:
 

USB2.0
Bluetooth4.0
GSM/GPRS SIM
Portable Super long standby
RFID identifly 125KHZ  134.2KHZ  13MHZ
RF data reception 27-900MHZ
RF radio frequency identification,support all kinds of remote controls
RF Data transmission, supports all kinds of remote control simulation test
Various types of vehicle anti-the fault detection, matching detection
Support four kinds of frequency 850/900/1800/1900MHZ
As for the products improvements, specifications are subject to change
CN900 Mini can use CN5 Chip to copy Toyota G Chip and 4D Chip. (It requires token to copy Toyota G Chip, CN900 Mini has 12 tokens as default for G Chip, when you use it up, you can contact us to charge another 12 tokens for free. And for the next times will need to pay to get more tokens.)

TOYO Key OBD2 how to work with cn900mini by Bluetooth?

1.TOYO-G(80bit) all key lost, write chips!
2.TOYO-8A(128bit) all key lost, write chips!
3.TOYO-smart card all key lost, write chips!
4.DAI-G(80BIT) all key lost, write chips!
5.NO need to take out instrument desk! to avoid damaging the car system.
 

TOYOT Key pro function:

 TOYO Key can program new key on:
Toyota ID72(G) all key lost
Toyota 8A(H) all key lost

TOYO Key is able to program key on some later:
Toyota smart card all key lost
VW Audi 48 chip all key lost

Toyota ID72(G) and 8A(H) all key lost, how to program new key by TJECU CN900Mini and Bluetooth TOYO Key OBD II key pro, here 4 steps to follow:
Step 1, Program new key then turn on ignition, then plug TOYO OBD into the car.
Step 2, Use the option 72G of CN900 MINI to connect, then start to initialize data, the immo indictor is on for a long time, then follow the CN900Mini prompt to operate.
Step 3, It will prompt “Complete/ Success”, and then the Immo indicator is on for a long time again.
Step 4: Turn on and off ignition for 5 times quickly, immo indicator is off.
Done.

How to activate TOYO Key OBDII to work with CN900mini/ND900 mini in order to Program Toyotda G Key?
Before programming Toyota G all keys lost, you need to activate and register TOYO Key OBDII with CN900mini/ND900 mini.

To use TOYO KEY OBD II KEY PRO with CN900mini/ND900 mini, you are required to update CN900mini/ND900 mini hardware version to 1.20.2.15 or higher version.

Step 1: connect Cn900mini to PC, and updated to Version 1.20.2.15, then back to CN900 main interface, click”OBDII Comm.”

Step 2: Click”ID72(G) IMMO reset”

Step 3: Cn900mini main interface display as pic4 (CN900 Mini will require to enter activation code), please take a photo of this and send to the salesmen which you contact, our salesmen will send this picture to our engineer, they will calculate the activation code; after the customer get the activation code and insert, it will register successfully.

Remark:  one activation code just can register one CN900mini machine, it can not register many cn900mini, please operate according this user manual, If the customer does not operate in accordance with the instructions of the machine damage to a series of problems, customers have to bear the cost of freight and maintenance.

Package Includes:

1pc x TOYO KEY OBD II KEY PRO
1pc x Mini CN900