Ford/Mazda UCDS Pro+ Diagnostic And Key Programming Device With the UCDS (Universal Can Diagnostic System) device, it is now very easy to perform fault detection and programming in FORD and MAZDA brand model vehicles. UCDS Pro+ for Ford Mazda With Full V2.0.007.009 UCDS Pro+ Download Software Full Extended License Can Update Online. UCDS Pro+ for Ford Mazda Diagnostic Tool Ford UCDS Pro+ Diagnostic and ECU Programming Device Support Ford And Mazda Diagnostic, ECU Programming And Odometer Correction.

Ford/Mazda UCDS Pro+ Diagnostic And Key Programming Device UCDS Pro+ for Ford Mazda With Full V2.0.007.009 UCDS Pro+ Download Software Full Extended License Can Update Online

UCDS Pro+ for Ford Mazda Diagnostic Tool Ford UCDS Pro+ Diagnostic and ECU Programming Device Support Ford And Mazda Diagnostic, ECU Programming And Odometer Correction

Ford UCDS Diagnostic and ECU Programming Device With the UCDS (Universal Can Diagnostic System) device, it is now very easy to perform fault detection and programming in FORD and MAZDA brand model vehicles.

Ford UCDS Pro+ for Ford/Mazda Software Version: Full 2.0.007.009 UCDS Pro+ Download Software

Ford UCDS Pro+ Diagnostic and ECU Programming Device Functions:

Reading and Deleting Fault Code,
ECU programming
Key Coding and identification
Finding V series radio code
ABS programming
Dashboard Calibration
Airbag module reset (Clear Crash Data)
Open Hidden Functions
Chip Tuning
Activating or deactivating modules
PCM / TCM Programming
EEPROM and FLASH read / write
Steering Angle sensor Reset
Programming Power Shift Transmissions
Body Control Unit programming
Cruise Control Calibration
Headlamb (Headlight) Calibration procedures
Touch panel calibration
Auxiliary heater control module programming

Ford UCDS Pro+ for Ford/Mazda Details:

Diagnostic adapter from the hardware-software Universal Can Diagnostic system (UCDS) is manufactured on a standard printed circuit board with the use of modern high-speed electronic components. It`s manufactured in Russia, Saint-Petersburg. PCB with the necessary controls and indicator lights is built into the standard plastic mini-box (photos 1-5) with USB-connector for connection to a PC with pre-installed drivers and software and OBD II connector for connection to the car diagnostic interface. Inspection lights allow you to visually determine the current state of the power supply, a process that takes place in real time (read/write data), depending on the mode of operation of the adapter. External controls on the adapter are made in the form of push-buttons that serve solely for the adapter mode without connecting to a PC. The adapter has built-in capability to update its internal software (firmware). For the latest version, please contact the developers.

Full 2.0.007.003 UCDS Pro+ Download Software Main features:

UCDS allows the user to: p>– Diagnose the majority of car parts and components that are connected to a central electrical module (GEM, BCMii) through the data bus (CAN);
– Receive data embedded in the car components and modules, including their part number, version, calibration, serial number;
– Make the necessary changes to the central configuration of the car, and change the configuration of the modules and components if necessary;
– Update the calibration (firmware) of the modules and components of the vehicle, including the engine (the so-called chip tuning);
– Perform regular language adaptation of the audio modules manufactured by SONY (Russian language only);
– Upgrade (replacement) of the door modules software to activate the automatic folding door mirrors.
– Other…

The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm.

The software interface of the UCDS interface has main window's mode. You need to select the type of the vehicle or select the service mode for adapter's firmware update or other service functions.

UCDS currently works with the following platforms: Focus II 2004-2011; Focus III 2011, 2015 ;FOCUS MK4; Kuga I, Kuga II; C-MAX; S-MAX; MONDEO IV; Mondeo 2015 ; Galaxy ; Tansit; Fiesta 2008, 20015 etc..

Why Buy UCDS Pro+ for Ford Mazda Diagnostic Tool:

1. With the UCDS (Universal Can Diagnostic System) device, it is now very easy to perform fault detection and programming in FORD and MAZDA brand model vehicles.

2. With this device, which can interfere with all Ford and Mazda brand model vehicles, you can perform many operations on vehicles such as fault detection, ecu programming, key coding, V series radio code retrieval, Abs programming, indicator calibration, Airbag reset, hidden feature activation and Module activation.

3. In addition, you can download the original ECU software of even the newest model vehicles online without requiring a password, and perform many functions such as key coding and spare key identification.

4. The most important feature of the UCDS programming device is that you can reload the original ECU programs without requiring a password for all vehicles until 2017 - 2018 model, and you can get V series radio codes.

OBD2cartool After-Sale Service:

Technical Support: Free

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

Shipment Note:

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

How to make order on OBD2cartool.com?

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks