VCDS 16.8.3 is obd2cartool newer clone HEX CAN USB Interface for AUDI VW SEAT SKODA. VAG 16.8.3 HEX CAN USB Interface works with Windows10 system .VAGCOM 16.8.3 support multi-language:Deutsch/English/France/Hungarian/Russian...
Main Chips: VAGCOM 16.8.3 with Original Chip ATMEGA162 + 16V8B + FT232RL + 9241A
This one English version support full function,other language only could do diagnostic. but PCB 1:1 as original ,if your have dumps support reprogram it!!
If you need software not in CD,please downlaod software from original website:
If vcds interface not be found,or you dont know how to get ID number,please download this file to your C:Ross- techVCDS(-XXX), and Do not running any an-virus program. we have test it is work well!!
How to install VAG 16.8.3 to your PC,please look install vedio:
functions supported: Control Module ID and Advanced ID, Fault Codes (Read and Clear),
Supported Codes, Security Access, and Adaptation. Other functions such as Measuring Values,
Output Tests, and Basic Settings will be added in future versions.
2.New more universal Airbag Coding Assistant.
3.New "Upload Debug/Log File" function in Applications Dialog
4.Completely revised and expanded ROD (ODX) Data.
5.New USB Drivers. Now compatible with the latest PCs which use Fresco Logic USB3
6.Refactored DTC routines which interpret DTC data, including enhanced interpretation of status
byte for DTCs in UDS modules.
7.New area to display additional info for Basic Settings.
8.Added data types 0B, 0D, 0F to Generic OBD-II Mode 9.
9.New version of LCode.
10.Revised and expanded Label Files.
Download the self-installing distribution file available below.
Run it and follow the prompts to allow it to install itself.
The installer will prompt you if you wish to see a PDF of installation instructions.
It may not work properly if you try running it directly from other media.
However, you can use other media such as a CD or USB memory key to move the distribution file from a PC with internet access to another PC that does not have internet access.
Turn the car's ignition switch ON. No need to start the engine.
Click [Options] and select the correct communications port.
Use [Test] to confirm that the program can use the port and find the interface.
Now Play. Make sure the software can reliably access all the control modules that it should in your car.
Release 16.8 works with Windows XP, Vista, 7, 8, and 10 (both 32-bit and 64-bit)
Windows 2000 will probably still work, but we no longer consider it supported.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.
Release 15.7 must be used with a HEX-, KEY-, KII-, or Micro-CAN "high-tech" Interface.
1 x Vag 16.8.3 diagnostic cable
1 x CD 16.8.3 Software