433Mhz Wireless Remote 315Mhz Remote Control Code Scanner(Copier)

433Mhz Wireless Remote 315Mhz Remote Control Code Scanner(Copier)
Free shipping
Product Name

433Mhz Wireless Remote 315Mhz Remote Control Code Scanner(Copier)

Free Shipping

This product qualifies for free air shipping.
  • Model: KBD136
  • Shipping Weight: 0.2kg
  • Units in Stock: 478

Price:   $89.00

Please Choose:

  • 315mhz
  • 433mhz

2 Reviews            
  • Details
  • Order History
  • Reviews
  • Shipping&payment
  • Tags
  • FAQ

433Mhz/315Mhz Car key remote control is obd2cartool Wireless Remote Key/Code Scanner. 433Mhz/315Mhz Remote Control Code Scanner can Detect, receive, copy car remote control signals. Remote Control Code Scanner Detector key copier Working frequency range is 433Mhz/315Mhz.

433Mhz Wireless Remote 315Mhz Remote Control Code Scanner(Copier)

Options 1: 433Mhz

Options 2: 315Mhz

433Mhz remote control code scanner(copier)

Working frequency range: 433Mhz OR 315Mhz

433Mhz Remote Control Code Scanner Detector key copier is only for fixed code remote key, not for rolling code remote key.

433Mhz Car key remote control Wireless Remote Key/Code Scanner Detect, receive, copy car remote control signals, then command the car as freely as the car’s owner

433Mhz Remote Control Code Scanner receives the signal sent by the fixed code anti-theft system, save and copy the master’s remote control signal The effective distance is 500 metres Save thirty remote control signals Decodability chip: PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014

Operate Instruction

The machine uses a dedicated 9V power supply, switch on the left side, after booting, it will show English " Remote control Decode the tool ". The machine operates at a frequency of 305-433mhz. There are six keys--A, B, C, D, E, F. All feature set is completed by these six keys, the A-D key is the former group function, E, F keys are the latter function.

Notice: when install the batteries, ensure "+" to "+" and "-" to "-" to make it is possible to supply power for the machine

Specific operation instructions

A.Press any key to do setting after booting, in the general case each receives a signal, there will be two lines CAPION on the LCD panel, the first line before eight digital is the address of the received signal, after four is data bits, the second line is before three number is oscillation resistance, followed by four number is the chip type (received signal can be generated by remote control, infrared magnetic door)

1. when received signal, directly press A or B or C or D can change the received signal data and laun-ch out

2. when receiving the signal, press the F key, In a lower place of the LCD display show *, the machine keep the last time received signals, and refused to accept any other signal. We can change the signal data bits via A, B, C, D key and press E key to laun-ch out the modified encoding

B.Scan Function: when a set of normal use anti-theft host missing accessories, you can use the machine to scan for the coding, then made remote control and other accessories for it.

Specific operation as follows:

Press E key after booting, at the bottom right of the LCD display appears 1.2M*, means the testing vibration resistance value is 1.2M ohm, press the F key can change the oscillation resistance value, optional respectively is 1.8M, 2.2M, 3.3M, 4.7M. After confirmed the vibration resistance value, must provide the data bits, choose any key from A, B, C, D, press E to start scan. Normal band all the scan is complete need to 10 minutes, LCD screen first line before 8 numbers is changing to scan address bits, the second line the front changing information is scan times. When scanning to the encoding of the anti-theft host, the host will make a sound, scanning continues to forward, we press F key, the machine backward scan, also will slow down, when heard the host sound again, press the E key and hold for more than 2 minutes the let go, at this time, the appears address bits is the address code of the anti-theft host(Note: The base operating less skilled, address bits may also scan backward one or two more bits, you need to use "every three into one" method on the basis of the address code plus one or two, you can first scan to the address bits then record it by pen, and then every three into one on the basis of the record address bits, all = 010 010 + 1 = 011 12010122 + 1 = 12012200 And by this analogy, you can get the real address of the address bits encoding) to determine if the encoding is correct, use below "c"  function to self test encoding.

C.Optional encoding function: it is a test method used when not sure about the address bits.

Specific operation as follows:

Press E key after booting, it will appears the same interface with " B" scan function, press F to select the appropriate oscillation resistor value, and then press the E key again, on the right of the resistance value appears one "+" sign, at the top left appears eight address code flashing point, press one or two keys to increase or decrease the value. Press A or B to increase or reduce value, pree C or D to move left and right, press E again can laun-ch out.

D. Storage Function

1. In the boot state, each receiving a wireless signal, press the "E" key to store.

2. Press A and B at same time, when Lcd display appears " S " sign, press E can call up the stored coding sequence.

With the Progressive press "1" and "2" key to display "S" symbol, press the "5" key to successively call up the stored encoding, press "A" or "B" or "C" or "D" to laun-ch out the encoding.

3. Forwarding function: Press C and D at same time, when appears "1" sign can activate the forwarding function. Tthe display appears "/" sign when receiving an unknown code, press the "F" key forwards, press the "E" key to exit. If known received encoded chip, it will not be forwarded.

Note: LCD display show *, the machine refuse to accept any other signal. When you press the F key, the * disappear and you can receive the signal again.

This wireless Remote control Detector & Duplicator is only for testing and study, Otherwise accept the consequences by yourself if violate the state laws in your country. just sell to Car repair service shop, Garage, workshop, it is also the Car locksmith tool


OBD2cartool After-Sale Service:


Technical Support: Free


Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.


Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@yahoo.com, we will give you best discount for long-term cooperate.


Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.


Shipment Note:


1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.


How to make order on OBD2cartool.com?


shopping process


Notice: After you place order, pls reply confirm email send by obd2cartool@yahoo.com asap for us to arrange ship for you, thanks

  • Online Tracking Packages

    All packages have online tracking number
  • Customer Protection

    100% Full Refund if you don't receive your parcel
  • Available Payment Term

    PayPal, Visa/MasterCard, Western Union, Bank Transfer...
  • Service Guarantee

    Free Technical support, One year warranty